perma FLEX

The automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125 cm³). It can be used for inside or outside applications at temperatures ranging from -20 °C to +60 °C. Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the lubricator.
perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to the desired discharge period and the system is activated. The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant.

  • All-in-one system with rotary switch for discharge period setting
  • Reliable operation at -20 °C to +60 °C
  • EX-Schutz-LogoEx-proof certification, FM certification
Download Flyer

perma FLEX is a single-point lubrication system for all types of applications and industries. Ingress protection to IP 68 level guarantees reliable lubrication in extremely dusty and moist environments. The wide operating temperature range makes it suitable for many applications indoors and outdoors. If necessary, the discharge period can be adjusted even after activation. It can be switched off during longer non-operation periods.



Blowers / fans

Roller bearings

Sliding bearings

Open gears


Shaft seals


All-in-one system with rotary switch for discharge period setting

Reliable operation at -20 °C to +60 °C


Ex-proof certification, FM certification

DriveGas generating unit
HousingTransparent plastic
Discharge period1, 2, 3, ... 12 months
Lubricant volume60 cm³, 125 cm³
Operating temperature-20 °C to +60 °C
Pressure build-upmax. 5 bar
LubricantsGrease up to NLGI 2 / oil
Protection classIP 68
Max. tube lengths2.00 m
IEC Ex✓️
Marco Lieb

Marco Lieb

Director of Sales | Authorised Officer

Further information & contact

Our staff will be happy to advise you at any time. Commonly asked questions regarding this product are available in the FAQs section.