perma PRO C MP-6 

The user can select LC unit sizes 250 cm³ and 500 cm³. Each perma PRO can be programmed for lubricant discharge in days, weeks or months, up to a maximum dispensing period of 24 months. The MP-6 distributor supplies up to 6 lubrication points directly without pressure loss (max. 25 bar) and enables the use of tube extensions up to a length of 5 m. perma PRO C MP-6 can also be operated in IMPULSE mode. The impulse for a lubricant discharge can be PLC controlled. Power is supplied via the machine and can be PLC monitored and controlled.

  • Setting via push button with display and LED
  • MP-6 distributor with 6 outlets
  • Pressure build-up to 25 bar
Download Flyer

perma PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots. Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.

Linear guides


Roller bearings

Sliding bearings

Shaft seals

Open gears

Setting via push button with display and LED

MP-6 distributor with 6 outlets – Number of active outlets can be user-defined

Pressure build-up to 25 bar allows remote mounting up to 5 m per outlet

Power supplyExternal: 15–30 V
HousingMetal / Transparent plastic
Discharge period1 day to 24 months
Lubricant volume250 cm³, 500 cm³
Operating temperature-20 °C to +60 °C
Pressure build-up25 bar
Number of outlets1 - 6
LubricantsGrease up to NLGI 2
Max. tube lengths5.00 m
Impulse controlled✓️
Marco Lieb

Marco Lieb

Director of Sales | Authorised Officer

Further information & contact

Our staff will be happy to advise you at any time. Commonly asked questions regarding this product are available in the FAQs section.