perma PRO MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots. Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
Setting via push button with display and LED
- Easy configuration
- Display of remaining volume and active outlets
- Status control on display
MP-6 distributor with 6 outlets – Number of active outlets can be user-defined
- Supply of 1 to 6 lubrication points with same lubricant amount
- Precise supply of lubrication points
- Monitoring of lubrication point status
Pressure build-up to 25 bar allows remote mounting up to 5 m per outlet
- Mounting outside of dangerous areas increases workplace safety
- Higher equipment availability since LC can be exchanged during running operation
- Lubrication point can be purged to clear blockages
| Drive | Electromechanical |
|---|---|
| Power supply | Battery PRO B |
| Housing | Metal / Transparent plastic |
| Discharge period | 1 day to 24 months |
| Lubricant volume | 250 cm³, 500 cm³ |
| Operating temperature | -20 °C to +60 °C |
| Pressure build-up | 25 bar |
| Number of outlets | 1 - 6 |
| Lubricants | Grease up to NLGI 2 |
| Max. tube lengths | 5.00 m |
| CE | ✓️️ |
| UL | ✓️ |
Further information & contact
Our staff will be happy to advise you at any time. Commonly asked questions regarding this product are available in the FAQs section.
