Lubricant selection is an important factor for achieving extended bearing service life. To increase the process safety of your machines and equipment you must select the right lubricant, the right place, the right time and the right amount.
perma's lubricant selection program helps you to select a lubricant that is especially suited for a specific application and for use in perma lubrication systems.
Lubricants
perma Multipurpose grease SF01
NLGI-grade 2 Thickener Li / Ca Base oil Mineral oil Operating temperature [°C] -30 to +130 Viscosity at +40 °C [mm²/s] 150 Speed index 300,000 Labelling as per DIN 51502: KP2K-30
- Powerful multipurpose grease
- Wear reducing thanks to EP additives
- Free of heavy metals & silicone
perma Extreme pressure grease SF02
NLGI-grade 2 Thickener Li + MoS2 Base oil Mineral oil Operating temperature [°C] -30 to +120 Viscosity at +40 °C [mm²/s] 100 Speed index 350,000 Labelling as per DIN 51502: OGF2K-30
- High-pressure grease with MoS2
- Ageing- & oxidation-resistant
- Good dry-running properties
perma High temp. grease SF03
NLGI-grade 2 Thickener Polyurea Base oil Ester + PFPE Operating temperature [°C] -20 to +220 Viscosity at +40 °C [mm²/s] 420 Speed index 300,000 Labelling as per DIN 51502: KE2T-20
- Good oil retention
- High thermal stability
- Good corrosion protection
perma High performance grease SF04
NLGI-grade 0/1 Thickener Polyurea Base oil Mineral oil + PAO Operating temperature [°C] -20 to +160 Viscosity at +40 °C [mm²/s] 500 Speed index 200,000 Labelling as per DIN 51502: K1P-20
- Multipurpose lubricant for extreme requirements
- Powerful at high temperatures & vibrations
- Resistant to aggressive media
perma High temp. / Extreme pressure grease SF05
NLGI-grade 0/1 Thickener Polyurea + MoS2 Base oil Mineral oil + PAO Operating temperature [°C] -20 to+160 Viscosity at +40 °C [mm²/s] 500 Speed index 200,000 Labelling as per DIN 51502: KPF1P-20
- Multipurpose grease for extreme requirements
- High load-carrying capacity
- Good dry-running properties thanks to solid lubricants
perma Liquid grease SF06
NLGI-grade 0 Thickener Al-Com. Base oil Mineral oil Operating temperature [°C] -20 to +130 Viscosity at +40 °C [mm²/s] 220 Speed index 300,000 Labelling as per DIN 51502: K0K-20
- Good water resistance
- High wear protection
- Easily pumped
perma High speed grease SF08
NLGI-grade 2 Thickener Ca-Com. Base oil PAO Operating temperature [°C] -40 to +140 Viscosity at +40 °C [mm²/s] 100 Speed index 600,000 Labelling as per DIN 51502: KHC2N-40
- High speed index
- Low friction coefficient due to synthetic base oil
- Broad operating temperature range
perma Multipurpose bio grease SF09
NLGI-grade 2 Thickener PHS Base oil Ester Operating temperature [°C] -40 to +140 Viscosity at +40 °C [mm²/s] 100 Speed index 300,000 
Labelling as per DIN 51502: KPE2N-40
- Rapidly biodegradable
- Water hazard class WGK 1
- Fully synthetic
perma Food grade grease H1 SF10
NLGI-grade 1 Thickener Al-Com. Base oil PAO Operating temperature [°C] -45 to +120 Viscosity at +40 °C [mm²/s] 150 Speed index 500,000 
Labelling as per DIN 51502: KHC1K-40
- Synthetic
- Good wear protection & low temperature resistance
- Good water resistance
perma High performance oil SO14
Lubricant Oil Base oil PAO + Ester Operating temperature [°C] -20 to +250 Viscosity at +40 °C [mm²/s] 320
Labelling as per DIN 51 517-3: CLPE 320
- Lubricates effectively even at high operating temperatures
- Good viscosity/temperature behaviour
- Special creep properties ensure rapid film formation
perma Multipurpose oil SO32
Lubricant Oil Base oil Mineral oil Operating temperature [°C] -5 to +100 Viscosity at +40 °C [mm²/s] 100
Labelling as per DIN 51 517-3: CLP 100
- High performance transmission & multipurpose oil
- Ageing- & oxidation-resistant
- Good wear protection for gear teeth & roller bearings
perma Bio oil, low viscosity SO64
Lubricant Oil Base oil Ester Operating temperature [°C] -30 to +110 Viscosity at +40 °C [mm²/s] 100
Labelling as per DIN 51 517-3: CLPE 100
- Multipurpose oil
- Rapidly biodegradable
- Good viscosity / temperature behaviour
perma Bio oil, high viscosity SO69
Lubricant Oil Base oil Ester Operating temperature [°C] -20 to +110 Viscosity at +40 °C [mm²/s] 320
Labelling as per DIN 51 517-3: CLPE 320
- Multipurpose oil
- Rapidly biodegradable
- Good wear protection
perma Food grade oil H1 SO70
Lubricant Oil Base oil PAO + Ester Operating temperature [°C] -30 to +120 Viscosity at +40 °C [mm²/s] 220
Labelling as per DIN 51 517-3: CLPH 220
- Broad operating temperature range
- Very good ageing & oxidation resistance
- Good wear protection
Additives
Additives are organic or inorganic compounds mixed into the base oil to enhance the existing oil properties or to impart new properties. Examples: AW (anti-wear) and EP (extreme pressure) additives.
Additives are selected based on the requirements of the application.Speed index
The speed factor indicates the permissible bearing speed range for lubricants. The perma lubricant overview indicates the max. speed for grease lubrication of deep groove ball bearings. The n x dm factor is a criterion for the selection of the grease taking into consideration bearing size and operating speed.
Calculation:
n x dm = speed factor
dm = (D + d) ÷ 2
n = Operating speed (1/min)
D = Outside bearing diameter
d = Inside (bore) bearing diameter
dm = Bearing sizeOperating temperature
The safe function of components can be guaranteed within this temperature
range. Using the lubricant outside this range can lead to damage.Base oil
Base oil is the main component of a grease and infl uences its behavior.
Base oils may be mineral oil, hydrocracked oil, polyalphaolefi n (PAO) oil, or synthetic ester oil.Base oil viscosity
Base oil viscosity indicates the flow capability of the base oil. Low viscosity base oils are used for very high speeds. High viscosity base oils are used for high load applications. The viscosity of a typical roller bearing grease at +40 °C is between 15 and 500 mm²/s.NLGI grade
Greases are divided into various consistency grades (NLGI grade).
High consistency = stiff grease = high NLGI grade
Low consistency = soft grease = low NLGI grade
NLGI starts at 000 (liquid) to 6 (very stiff).
Greases up to NLGI grade 2 are suitable for use in perma lubrication systems.Thickeners
The thickener acts like a sponge. It holds the individual components of the grease together and ensures that the oil stays at the contact point.Art. No. Cartridges / Pails / Bottles / Canisters for pre-filling
Grease Cartridge
400 gPail
1 kgPail
5 kgperma Multipurpose grease SF01
101585 107494 107508 perma Extreme pressure grease SF02 101588 107495 107509 perma High temp. grease SF03 101589 107496 107510 perma High performance grease SF04 101590 107497 107511 perma High temp. / Extreme pressure grease SF05 101591 107498 107512 perma Liquid grease SF06 101592 107499 107513 perma High speed grease SF08 101593 107500 107514 perma Multipurpose bio grease SF09 101594 107501 107515 perma Food grade grease H1 SF10 101595 107502 107516 
Oil Bottle
1 ltrBottle
5 ltrperma High performance oil SO14 107463 107520 perma Multipurpose oil SO32 107465 107521 perma Bio oil, low viscosity SO64 107469 107523 perma Bio oil, high viscosity SO69 107472 107525 perma Food grade oil H1 SO70 107473 107526 Safety data sheets
Grease
Oil
If you cannot find the required data sheet, please send your email request
to lubricants(at)perma-tec.com and we will provide it via email.Additives
Additives are organic or inorganic compounds mixed into the base oil to enhance the existing oil properties or to impart new properties. Examples: AW (anti-wear) and EP (extreme pressure) additives.
Additives are selected based on the requirements of the application.Speed index
The speed factor indicates the permissible bearing speed range for lubricants. The perma lubricant overview indicates the max. speed for grease lubrication of deep groove ball bearings. The n x dm factor is a criterion for the selection of the grease taking into consideration bearing size and operating speed.
Calculation:
n x dm = speed factor
dm = (D + d) ÷ 2
n = Operating speed (1/min)
D = Outside bearing diameter
d = Inside (bore) bearing diameter
dm = Bearing sizeOperating temperature
The safe function of components can be guaranteed within this temperature
range. Using the lubricant outside this range can lead to damage.Base oil
Base oil is the main component of a grease and infl uences its behavior.
Base oils may be mineral oil, hydrocracked oil, polyalphaolefi n (PAO) oil, or synthetic ester oil.Base oil viscosity
Base oil viscosity indicates the flow capability of the base oil. Low viscosity base oils are used for very high speeds. High viscosity base oils are used for high load applications. The viscosity of a typical roller bearing grease at +40 °C is between 15 and 500 mm²/s.NLGI grade
Greases are divided into various consistency grades (NLGI grade).
High consistency = stiff grease = high NLGI grade
Low consistency = soft grease = low NLGI grade
NLGI starts at 000 (liquid) to 6 (very stiff).
Greases up to NLGI grade 2 are suitable for use in perma lubrication systems.Thickeners
The thickener acts like a sponge. It holds the individual components of the grease together and ensures that the oil stays at the contact point.Technical data sheets
Grease
Oil
If you cannot find the required data sheet, please send your email request
to lubricants(at)perma-tec.com and we will provide it via email.Additives
Additives are organic or inorganic compounds mixed into the base oil to enhance the existing oil properties or to impart new properties. Examples: AW (anti-wear) and EP (extreme pressure) additives.
Additives are selected based on the requirements of the application.Speed index
The speed factor indicates the permissible bearing speed range for lubricants. The perma lubricant overview indicates the max. speed for grease lubrication of deep groove ball bearings. The n x dm factor is a criterion for the selection of the grease taking into consideration bearing size and operating speed.
Calculation:
n x dm = speed factor
dm = (D + d) ÷ 2
n = Operating speed (1/min)
D = Outside bearing diameter
d = Inside (bore) bearing diameter
dm = Bearing sizeOperating temperature
The safe function of components can be guaranteed within this temperature
range. Using the lubricant outside this range can lead to damage.Base oil
Base oil is the main component of a grease and infl uences its behavior.
Base oils may be mineral oil, hydrocracked oil, polyalphaolefi n (PAO) oil, or synthetic ester oil.Base oil viscosity
Base oil viscosity indicates the flow capability of the base oil. Low viscosity base oils are used for very high speeds. High viscosity base oils are used for high load applications. The viscosity of a typical roller bearing grease at +40 °C is between 15 and 500 mm²/s.NLGI grade
Greases are divided into various consistency grades (NLGI grade).
High consistency = stiff grease = high NLGI grade
Low consistency = soft grease = low NLGI grade
NLGI starts at 000 (liquid) to 6 (very stiff).
Greases up to NLGI grade 2 are suitable for use in perma lubrication systems.Thickeners
The thickener acts like a sponge. It holds the individual components of the grease together and ensures that the oil stays at the contact point.
Data sheet search
If you cannot find the required data sheet, please send your email request to lubricants(at)perma-tec.com and we will provide it via email.