Determination of mounting type

perma lubrication systems are extremely flexible in their use for many applications, e.g. conveyor systems, electric motors, pump, fans and blowers.
Automatic lubrication systems can be mounted directly into most lubrications points.
Remote mounting is possible with grease lines.

  • 1. Determine the lubrication point parameters to specify the optimal mounting type

  • 2. Decide which mounting type is suitable

    With direct mounting you can take advantage of the reliable function without spending much time and effort for mounting. The lubrication system is directly screwed into the lubrication point and ensures high process reliability by continuously supplying fresh lubricant.

    Remote mounting might be required if your answer to one of the following questions is „YES“:

    • Is it necessary to remove protective covers or screens in order to reach the lubrication point?
    • Is it difficult or dangerous to reach the lubrication point during plant operation?
    • Is the lubrication point subject to strong vibrations or high temperatures which may impair or damage the lubrication system?
    • Is access permission required to reach lubrication points in secured areas or at great heights?
    • Is the lubrication system exposed to the following: 
      - Large amounts of water (e.g. high pressure cleaning)
      - Aggressive media from production (e.g. pumps in the chemical industry)
      - Damage from solid substances (e.g. falling rocks in quarries)

    Direct mounting

    Remote mounting

  • 3. Direct or remote mounting

    Direct mounting

    Contents for all INSTALLATION KITS

     Contents
    A

    1 x Reducer G1/8 male x G1/4 female
    1 x Reducer M6 male x G1/4 female     
    1 x Reducer M8x1 male x G1/4 female
    1 x Reducer M10x1male x G1/4 female

    B1 x Extension G1/4male x G1/4 female - 45 mm
    C1 x Angle 45° G1/4 male x G1/4 female
    D1 x Support flange STAR G1/4 male x G1/4 female (only with Art. No. 101477)

    Remote mounting

    Contents for all INSTALLATION KITS

     Contents
    A1 x Reducer G1/8male x G1/4 female     
    1 x Reducer M6 male x G1/4 female     
    1 x Reducer M8x1 male x G1/4 female
    1 x Reducer M10x1 male x G1/4 female
    B1 x Extension G1/4 male x G1/4 female - 45 mm
    C1 x Angle 45° G1/4 male x G1/4 female
    D2 x Tube connector G1/4 male for tube iØ 9,5 mm (steel, zinc-plated) - push-lock
    E3 m Heavy Duty hose up to +100 °C (with NBR lining and fabric insert) 
    F1 x 1 point bracket G1/4 female for 1 lubrication system
    G1 x Support flange STAR Gen 2.0 G1/4 male x G1/4 female (only with Art. No. 101482)

    ✔ perma has more useful tips for the mounting of perma lubrication systems

    ✔ Special MOUNTING SETS and accessories are available for each mounting type

    ✔ perma also offers a large selection of grease and oil to meet the many different requirements of users