perma-tec GmbH & Co. KG

STAR CONTROL IMPULSE

Product characteristics

- Fully automatic, temperature independent, precise
- Electromechanical drive (external power supply required)
- Transparent plastic housing
- Re-usable drive is environmentally friendly
- 3 different LC-unit volumes available
(60cc, 120cc, 250cc) and exchange on
site possible
- Various discharge amounts
- Impulse-controlled lubrication possible
- Pressure build-up to 5 bar/75 psi max.
- Operating temperature -10 to +50 °C/
+14 to +122 °F
- Protected against dust and splash water
(as in IP54), non-corrosive
- EX-version available upon request

Applications

perma STAR CONTROL is used for lubrication of roller- and sliding bearings, chains, open gears, guides, and seals. Machine downtimes can be reduced drastically when perma STAR CONTROL is used in applications that require lubrication to take place only when the machine is running. Connection to PLC is possible.

Your advantages

Improved safety and lower costs than manual lubrication
Controlled and permanent lubrication
- small amounts in short intervals
Power supply via machine (no battery pack exchange required)
Works independent of temperature and vibration
Re-usable drive unit
Pressure build-up to 5 bar/75 psi allows the use of flexible tube extensions up to 3 m
LED signals operating conditions (operating, empty, malfunction)
Transparent housing permits visual control of remaining lubricant
Non-corrosive transparent plastic housing
Discharge amounts can be selected according to individual lubrication point requirements and depending on machine operating time
Signals current operating conditions to PLC
Exchange manually – no tools required

Operating Instructions

You may download the updated operating instructions from our Download Center
[more...]

SELECT Software

Calculate lubricant amount and select suitable lubricants by using the free-of-charge SELECT software
[more...]